Concrete Molds Path Maker Mold DIY Reusable Concrete Paving Mold Cement Brick Mold Stone Garden Floor Road Pave Scraper Trowel
Garden Walk Pavement Mold DIY Manually Paving Cement Brick Stone Road Concrete Molds Path Maker
1. Very practical garden tools - Concrete garden molds will help you decorate your backyard landscape. 2. Use heavy-duty plastic molds to turn some pre-mixed concrete into concrete garden stepping stones for easy access to the garden.
3. By using garden stepping stones as your path, the beauty and health of your plants.
4. Spray the cleaning mold with a garden hose for reuse.
5. Once the first garden stepping stone is watered, the garden stone mold can be used again.
6. Ideal for creating sidewalks, sidewalks, trails, terraces, picnic areas and other outdoor finishes.
7. Enjoy DIY's personal philosophy with stone molds and create beautiful paths in your garden right away.
8. DIY plastic molding paving mold is a personalized brick mold, the effect of laying is like a stone.
9. Make the path more exotic and create a style that belongs to your own garden path.
How to use:
Mix the cement with water according to the packing instructions. When ready for use, the concrete will be the consistency of the oatmeal and thick enough to hold the edges when cut with a shovel.
Fill the paver mold, plow the concrete with a shovel and make sure to fill each area.
Use rubber gloves to spread the concrete around the mold and fill any gaps or low points. Tap the mold by hand to remove any air bubbles.
Smooth the concrete according to the contour of the mold and wipe off the excess.
Allow the concrete to set up to five minutes and carefully remove the mold. For the next stretch, rotate the mold a quarter turn and place it next to the paver you just finished. If you are creating a curved path, tilt it slightly.
After allowing the concrete to solidify overnight, fill the crack with dirt and rinse off the excess. Wet the ground around the newly formed paver to help them settle.
Size: about 43*43*4cm/16.92*16.92*1.57'', about 40*40*4cm/15.74*15.74**1.57'', about 29*28*4.4cm/11.41*11.02*1.73''
Weight: about 920g, about 600g, about 220g
Model: Foot, Butterfly, Hexagon, Square
Single foot: 45*27*4cm/17.71*10.62*1.57''
Forming single foot: 41*23*3.5cm /16.14*9.05*1.37''
Forming butterfly: 40*27*4cm/15.74*10.62*1.57''
Weight: about 530g for a pair of feet, about 300g for a butterfly, and about 300g for a hexagon, about 540g for a square
Material: PP resin
Type: Garden Tortoise Path Maker Mold
Uses: Paving roads, landscape stones
Modeling turtle size: 40x34x3.8cm/15.75x13.39x1.5"
E-01: 50 X 50 X 4.5cm/19.69 X 19.69 X 1.77"
E-02: 50 X 50 X 4.5cm/19.69 X 19.69 X 1.77"
E-03: 45 X 40 X 4cm/17.72 X 15.75 X 1.57"
E-04: 36 X 36 X 4cm/14.17 X 14.17 X 1.57"
E-01: about 1310g
E-02: about 825g
E-03: about 745g
E-04: about 460g
Square: 25 X 25 X 4cm/9.84 x 9.84 x 1.57"
Fan-shaped: 25 X 25 X 5cm/9.84 X 9.84 X 1.97"
Wave: 22 X 11 X 6cm/8.66 X 4.33 X 2.36"
Square: about 240g
Fan-shaped: about 280g
Wave: about 150g
Size: 295*170mm/11.61*6.69'', 275*170mm/10.82*6.69''
Color: as shown
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item.Thanks for your understanding.
Product Material: Plastics
Material: PP resin
Flower pattern: 40*40cm/15.75*15.75"
1 x Pavement Mold